HangAway Universal Toothbrush Holder with 3M adhesive tape
 |
Installation: 1. Choose a desired permanent location. Consider utilizing the back side of any cabinet door, but be careful to avoid interference when closing the door. 2. Apply Holder to a clean dry, smooth flat surface. Avoid surface areas that may be bowed or inconsistent such as; paneling, drywall or tile gaps. 3. Temporarily secure holder with scotch tape, then insert brushes at neck. 4. Check for easy access, comfort and removability of all brushes. 5. Check all clearance height, length, width & depth. 6. Use a pencil to mark holders' returning position. 7. Remove one adhesive tape line and adhere to back of holder where indicated. 8. Remove remaining tape liner and carefully adhere holder into position. Press firmly. 9. With proper use, Holder will last a lifetime. Suggestions: Additional holders may be applied side by side. The use of a level may help but is not necessary. Caution: Do not affix holder to the back of a mirrored cabinet door that has exposed silver plating. Not intended to suspend the weight of a battery powered brush; however, a single rung may be trimmed off with a household scissors to stabilize and secure a rested battery brush to prevent it from falling. (10). Children should be instructed to grasp the bottom of their brush handle to remove their brush with one easy outward motion. ....read more
